Core Speed Valve

FixMyKite.com Self-Stick-Valves will stick on any bladder material or color. Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder. The specially formulated adhesive is incredibly durable, making for a permanent repair. Everything needed for installing the new valve is included in the package: alcohol wipe and detailed instructions.

MEGA Option

The MEGA valve option refers to the size of the TEAR-AID PATCH ONLY. MEGA patches are 4 inches in diameter as opposed to the standard valve patch which has a 3” diameter. This extra inch means 77% more adhesive base and surface area compared to the standard valve patch size. The MEGA-valve patch is necessary when the old valve is cut from the bladder or leaves a tear during removal. The additional surface area provided by the Mega valve Tear-Aid patch allows quick and easy bladder repair, eliminating the need for an additional bladder patch. The Mega Valve Patch can also be used if the valve area of the bladder is warped.

If your old valve(s) cleanly peel(s) off, a larger Mega patch in most cases isn’t necessary.

How to Install a FixMyKite.com Self-Stick Valve

1. Valve Removal: If replacing the valve, carefully peel off the old valve. If the old valve does not peel off, cut around the circumference of the valve to remove it.
2. Cleaning: Wipe the area where the valve will be placed with the provided alcohol swab. DRY COMPLETELY WITH A CLEAN PAPER TOWEL.
3. Peel and Stick: Lay the bladder out flat. If possible, have a friend lightly hold the bladder on a table or another smooth, even surface. Peel off the paper backing, center the valve over the hole, and place the valve on the bladder.
4. Press: Press the valve from the center outward to remove air bubbles and ensure proper adhesion.

Pro Tip: Use a hair dryer to heat the valve before removing it. This makes it easier to take off the valve. After placing the FixMyKite self-stick valve, use the hair dryer again to warm the adhesive. Press the valve from the center out, massaging and stretching to create positive adhesion. Be careful not to overheat the bladder or the new valve.